How to Adjust Louver Tension

Posted by

·

Loose Louvers? Let us help you!

Phillips or flat-head screwdriver

1. Open Louvers Horizontally: Start by fully opening the louvers so they are parallel to the ground.

2. Locate Tension Screws: Open the panel of the shutter and look for the tension screws on the side of the frame. These are usually located near the top and bottom hinges.

3. Adjust Tension Screws: Use your screwdriver to turn each screw. Clockwise rotation tightens the tension, while counterclockwise loosens it. Adjust each screw a little at a time to avoid damaging the louvers.

4. Evenly Tighten Screws: Ensure that you tighten the screws evenly on both sides of the panel to maintain balance and prevent warping.

If you have any questions or need further guidance, please don’t hesitate to contact us at 470-882-1166 or email us at admin@castleberryshutters.com. We’re here to help!

704 Executive Court, Woodstock, Georgia 30189